The SPECTE ATX is a fixed UHF reader. With its built-in antenna, it is ATEX and IEcex certified.
Its reading performance means you can identify products up to 4 metres away.
Equipped with PoE (Power over Ethernet), it is perfectly suited to industrial infrastructures. It also has 4 inputs and 4 outputs to simplify integration.
Carrier frequencies / Standards
UHF – 2 versions: 865 – 868 MHz : 866 MHz ETSI (Europe), Morocco (regulation n°ANRT/DG/n°7-10)…
902 – 928 MHz : 915 MHz FCC Part 15 (USA), Australia, New Zealand…
Air interface protocol & functions
EPC1 Gen 2 / ISO18000-63 – Untraceable – Block Permalock – ATA SPEC 2000 compatibility
Modes
Piloted (read/write)
Antenna
Integrated
RF Performance
Maximum radiated power up to 32.5 dBm (865 – 868 MHz) and 31 dBm (902 – 928 MHz) – Reading distance up to 4 m(1)
Anti-collision
Anticollision system combining reliability and rapid identification
Communication interfaces
TCP-IP / RS232 / RS485 with SSCP® communication protocol + USB WEDGE (keyboard emulation) / WLAN (via connection of a Wifi router to the Ethernet – optional)
Inputs / Outputs (GPIO)
4 inputs / 4 outputs opto-coupled and polarised at V+opt and V-opt (Max 30 v) – Input: 5 mA max each – Output: 200 mA max each
GPIO for applications with detection cells, traffic light control, industrial buzzer, etc.
Power supply
12 VDC to 30 VDC (24 VDC typical) or PoE(2) – Optimised power consumption: 24 VDC: 0.6 A
Connectors
Internals: Screw jack (power) – RJ45 (Ethernet: Lantronix module) – DE9 (Serial) – M12 (GPIO) – USB C (keyboard emulation)
External: 2 PAP-R0 M20 PE cable glands for external shielded cables. 10-19 mm
Materials
Aluminium alloy and stainless steel, epoxy grey RAL 9006
Dimensions (h x w x d) / Weight
310 x 270 x 174 mm (general tolerance to ISO NFT 58-000 standard) – 13.5 kg
Operating temperatures
– 20°C to + 50°C
Storage temperatures
– 40°C to + 65°C
Resistance
Explosion-proof enclosure Ex II 2 GD IP66 – Resistant to explosions, weather, water and dust
Reinforced structure with high resistance to shock and vibration (IK10 certified, IEC 60068-2-6 and MIL – STD-810G standards)
Mounting the player
4 fixing lugs on the enclosure
