Metal Reader CPR46.10

Description

This robust RFID card reader can be flush-mounted in metal machines and terminals. Its IP65 protection rating and high level of shock resistance offer maximum protection against environmental influences and vandalism. Thanks to its automatic power management and extremely low power consumption, the reader is ideally suited to solar and battery-powered machines and terminals.

  • Dimensions: 85 mm x 85 mm (visible section after installation), weight approx. 250 g
  • Material: plastic
  • Protection rating: IP65 (front), IP30 (rear)
  • Operating temperature: -25 °C to +70 °C
  • Storage temperature: -40 °C to +80 °C
  • Energy consumption: max. 500 mA in operation, approx. 100 μA in standby mode
  • Frequency: 13.56 MHz
  • RFID interface: ISO/IEC 14443-A/-B
  • Antenna: integrated
  • Power management: automatic wake-up by card, wake-up by host
  • Optical indicators: 4 green LEDs (EMV-Mode) or green/yellow/red LEDs
  • Transponder support: ISO 14443-A/-B, NFC

Products Similar